Ammonium nitrate thermal decomposition with additives

Runaway reactions present a potentially serious threat to the chemical process industry and the community; such reactions occur time and time again often with devastating consequences. The main objective of this research is to study the root causes associated with ammonium nitrate (AN) explosions during storage. The research focuses on AN fertilizers and studies the effects of different types of fertilizer compatible additives on AN thermal decomposition. Reactive Systems Screening Tool (RSST) has been used for reactivity evaluation and to better understand the mechanisms that result in explosion hazards. The results obtained from this tool have been reported in terms of parameters such as “onset” temperature, rate of temperature and pressure rise and maximum temperature. The runaway behavior of AN has been studied as a solid and solution in water. The effect of additives such as sodium sulfate (Na₂SO₄) and potassium chloride (KCl) has also been studied. Multiple tests have been conducted to determine the characteristics of AN decomposition accurately. The results show that the presence of sodium sulfate can increase the “onset” temperature of AN decomposition thus acting as AN thermal decomposition inhibitor, while potassium chloride tends to decrease the “onset” temperature thus acting as AN thermal decomposition promoter.     

石墨相氮化碳协同UV-H_2O_2光催化降解亚甲基蓝

以三聚氰胺为前驱体,经热解—回流法制备了石墨相氮化碳(g-C3N4),采用XRD、FTIR、SEM、EDS、PL等技术对g-C_3N_4进行了表征。研究了g-C_3N_4在UV-H_2O_2体系中对废水中亚甲基蓝(MB)的光降解效果。实验结果表明,UV+g-C_3N_4催化剂+H_2O_2体系能协同降解MB,在初始MB质量浓度为20 mg/L、初始废水p H为5、废水体积为250 mL、g-C_3N_4加入量为0.10 g、H_2O_2浓度为0.4 mmol/L、反应温度为25℃的优化工艺条件下,紫外光照射70 min时MB脱色率达98.32%。g-C_3N_4催化剂具有较好的重复使用性能,使用5次后MB脱色率仍保持在95.10%。     

基于ACF-AMDF的气井环空液面回波特征提取方法

为了精确有效地提取声波法检测气井环空液位的回波周期，在分析环空中测试波的传播特征及基音周期检测的基础上，提出1种基于检测信号短时自相关函数(ACF)及平均幅度差函数(AMDF)的液面回波周期提取方法；利用自主搭建的室内模拟实验系统开展了不同初始环空压力下环空液位检测实验；对检测信号进行中心削波处理并计算ACF/AMDF，提取出液面回波周期并与理论计算值对比分析；同时分析了现场环空液位检测信号，提取其回波周期。研究结果表明:提出的新方法能有效地用于提取环空液面回波周期；室内实验中，该方法最大误差绝对值为1.54%；该方法能够有效抑制液面回波信号中的随机噪声及接箍反射波等，处理后的信号曲线在回波周期处峰值更加突出、集中，而在其他位置更加平滑，提高了对液面回波周期特征的辨识能力。     

石化装置安全仪表系统KooN表决结构的误跳车率定量分析

为了更准确量化安全仪表系统的误跳车率，基于联锁回路SIF中传感器、逻辑解算器、执行机构引发误跳车的不同失效机理和模型，考虑共因失效对误跳车率的影响，提出1种更符合实际并适用于异型KooN结构的新子系统误跳车率计算模型（STR of Non-identical Redundant System，SNRS）。针对SIF回路的误跳车率计算，建立了1种分析安全联锁SIF回路误跳车率（Reliability based Spurious Trip，RST）的计算框架。研究结果表明:以某聚丙烯装置第三反应器保护系统为例，将SNRS和RST方法与目前主流的多种计算方法进行数值计算对比，验证了方法的有效性，能够有效进行定量分析。     

Catalytic oxidation of CO over Pt/Fe3O4 catalysts: Tuning O2 activation and CO adsorption

• Strong metal-support interaction exists on Pt/Fe₃O₄ catalysts. • Pt metal particles facilitate the formation of oxygen vacancies on Fe₃O₄. • Fe₃O₄ supports enhance the strength of CO adsorption on Pt metal particles. The self-inhibition behavior due to CO poisoning on Pt metal particles strongly impairs the performance of CO oxidation. It is an effective method to use reducible metal oxides for supporting Pt metal particles to avoid self-inhibition and to improve catalytic performance. In this work, we used in situ reductions of chloroplatinic acid on commercial Fe₃O₄ powder to prepare heterogeneous-structured Pt/Fe₃O₄ catalysts in the solution of ethylene glycol. The heterogeneous Pt/Fe₃O₄ catalysts achieved a better catalytic performance of CO oxidation compared with the Fe₃O₄ powder. The temperatures of 50% and 90% CO conversion were achieved above 260°C and 290°C at Pt/Fe₃O₄, respectively. However, they are accomplished on Fe₃O₄ at temperatures higher than 310°C. XRD, XPS, and H₂-TPR results confirmed that the metallic Pt atoms have a strong synergistic interaction with the Fe₃O₄ supports. TGA results and transient DRIFTS results proved that the Pt metal particles facilitate the release of lattice oxygen and the formation of oxygen vacancies on Fe₃O₄. The combined results of O₂-TPD and DRIFTS indicated that the activation step of oxygen molecules at surface oxygen vacancies could potentially be the rate-determining step of the catalytic CO oxidation at Pt/Fe₃O₄ catalysts. The reaction pathway involves a Pt-assisted Mars-van Krevelen (MvK) mechanism.     

农地整治权属调整中农户认知对行为响应的作用机制--基于改进TPB及多群组SEM

农地整治权属调整是实现农业规模化和现代化的重要手段,而农户有效参与是推动权属调整的内在动力,研究农地整治权属调整中农户认知对其行为响应的作用机制,有助于高效引导农户参与权属调整,并为制定农地整治权属调整的政策提供科学依据。基于改进计划行为理论和湖北省11个县(市、区)1044份农户抽样调查数据,采用多群组结构方程模型探究了农地整治权属调整中不同类型农户认知对其行为响应的作用机制。结果表明:农地整治权属调整中农户行为逻辑符合改进计划行为理论,农户的行为态度、主观规范、知觉行为控制交互影响行为意愿,进而转换为行为响应,政府支持在行为意愿和行为响应之间起到部分中介作用。总体上,农户行为响应是"自发性""诱发性"和"约束性"三重行动逻辑的结合,且"自发性"占主导地位。多群组结构方程估计结果表明,纯农型与兼业Ⅰ型农户的行为响应受到"自发性""诱发性"和"约束性"三重影响,兼业Ⅱ型农户受到"自发性"和"诱发性"双重影响,非农型农户仅受到"诱发性"单一影响。因此,为引导农户积极参与农地整治权属调整,应该分别针对各类农户相应地提高其参与的"自发性"和"诱发性",降低"约束性",充分发挥农村社会经济组织的作用,将四种不同类型农户的利益需求统筹考虑,降低权属调整过程中利益协调难度。     

整合消费与增加值视角的中国行业碳排放变动分解研究

在研究影响我国CO 2排放因素领域,基于投入产出技术的分解模型已成为主要的分析工具,现有研究多分别基于消费视角或收益视角展开分析。为全面评估各行业收益与消费对其上游、下游行业碳排放的综合影响,整合基于收益与基于消费两个视角,运用2012年与2015年我国投入产出表,构建两层嵌套式结构分解分析模型(SDA),比较分析消费规模效应、收益规模效应、行业流入、流出增加值变动效应、增加值结构变动效应等14个影响各行业碳排放变动的关键因素,并借助对消费者原则碳排放估算公式的重构,更准确地实现从增加值视角对各行业消费者原则碳排放变动的关键影响因素分析。研究发现:①研究期内,我国在总产出增长29.14%的同时碳排放量上升1.46%,各行业碳排放强度下降是主要的减排因素,其中建筑业减排贡献最大。②增排效应方面,影响从大到小依次为消费规模、收益规模、完全投入结构与完全消费结构四项效应,且前两个规模效应的影响是后两个结构效应的2倍以上,尤其建筑业消费规模效应、煤炭采选产品业收益规模效应增排较大。③消费规模扩大导致增排的原因并非行业本身生产规模扩大,而主要在于建筑业、服务业等行业规模扩张时吸收其他行业流入的增加值量增多。④收益规模扩大导致的增排效应方面,细分来说从大到小依次为劳动者报酬、生产税净额、固定资产折旧、营业盈余四项效应,且行业差异显著,如煤炭采选产品业的劳动者报酬效应,石油、炼焦产品和核燃料加工品业的生产税净额效应以及电力、热力生产和供应业的营业盈余效应增排贡献较大,而煤炭采选产品业的营业盈余效应、批发、零售业和住宿、餐饮业的生产税净额效应则减排贡献较大。     

隧道救援站通风网络优化设计及人员疏散研究*

为确定铁路隧道救援站最佳通风结构，对烟道布置提出合理建议，采用计算流体力学（CFD）的方法，对铁路隧道救援站通风网络进行优化设计。同时，采用模拟计算的方法对救援站人员疏散进行模拟分析，确定救援横通道布置及防护门开度设置的合理性。研究结果表明:在同等通风参数工况设置下，采用多节点排烟竖井结构后各救援横通道流量分配更均匀，救援站压力平衡性更好，通风效率可提升15%；通过疏散模拟证实，在长560 m的紧急救援站范围内设置10条疏散横通道，横通道设1.7 m宽的逃生门能够满足疏散要求。     

铁路沿线可燃重气储罐最小隔离区域划分探讨*

为保护铁路线，以某化工厂距离高铁路线最近的丙烯球罐为例，提出丙烯球罐泄漏最小隔离区域划分方法以及2种保护高铁线路方案，利用重气扩散模型和定量风险评价（QRA）软件分别进行丙烯扩散模拟、爆炸模拟，并进行危险与可操作性分析（HAZOP）和保护层分析（LOPA）。结果表明:球罐发生泄漏及火灾爆炸等事故，会给附近铁路线带来严重破坏；丙烯泄漏或球罐因周围其他设备设施或可燃物质着火而温度升高时，保护措施不足；隧道的安全可靠性要高于仅设1道防爆墙，隧道长度需覆盖最小隔离区域的可及范围，在扩散区域内也需设立普通挡墙，在极度危险情况下，需要实施高铁停开等保护措施。     

A multi-objective design optimisation of eco-friendly aircraft: the impact of noise fees on airplanes sustainable development

The current work deals with multi-objective optimisations including financial merit factors in the multi-disciplinary conceptual design of a commercial aircraft with a specific focus on noise social cost. The results of optimisations using financial and performance-oriented objective functions have been analysed and combined in a multi-objective optimisation problem using a three-dimensional objective vector. The main novelty of the present work is the analysis of social cost noise fees effectiveness integrated in financial models embracing a wider group of stakeholders’ interests. The foundations of this research lie on the air traffic increase envisaged in the next decades and the contextual growth of the urban areas nearby airport facilities. This scenario requires the aeronautical industry to handle the environment challenge taking into account all the social and economic effects. Indeed, the consolidated technology has approached a saturation point, therefore breakthrough concepts and configurations are mandatory. This matter is addressed as a highly multi-disciplinary problem within conceptual design framework. The financial model proposed is shown to highlight the need of appropriate noise fees as instruments to push all stakeholders towards a technology radical renewal and encourage the aeronautical industry towards a shared strategy in the development of an eco-friendly commercial aviation system.